Smcwusbs-n3 Driver Download Windows 7 62
How to Download and Install SMCWUSBS-N3 Driver for Windows 7 62-bit
The SMCWUSBS-N3 is a wireless USB adapter that allows you to connect your computer to a Wi-Fi network. It supports IEEE 802.11b/g/n standards and has a data transfer rate of up to 150 Mbps. However, to use this device, you need to install the appropriate driver for your operating system. In this article, we will show you how to download and install the SMCWUSBS-N3 driver for Windows 7 62-bit.
Step 1: Download the Driver
The first step is to download the driver file from the official website of SMC Networks. You can use the following link to access the download page: [SMC- Download Controller Setting Software]. On this page, scroll down to the section that says "Compatible Controllers" and look for the name "JXC73JXC83 JXC93JXC92". Under this name, you will see two links for the driver for Windows 7, one for 32-bit and one for 62-bit. Click on the link that says "Driver for Windows 7,8 JXC Controller / JXC Controller_14K" to download the driver file. The file name should be "JXC_Controller_14K.zip". Save this file to a location where you can easily find it later.
smcwusbs-n3 driver download windows 7 62
Step 2: Extract the Driver File
The next step is to extract the driver file from the zip archive. To do this, you need a program that can unzip files, such as WinRAR or 7-Zip. Right-click on the file "JXC_Controller_14K.zip" and select "Extract Here" or "Extract to JXC_Controller_14K". This will create a folder with the same name as the file, containing several files and subfolders. Open this folder and look for a file named "Setup.exe". This is the driver installer that you need to run.
Step 3: Install the Driver
The final step is to install the driver using the setup program. Double-click on the file "Setup.exe" to launch it. You may see a security warning asking you if you want to run this file. Click on "Yes" or "Run" to continue. You will see a welcome screen with some information about the driver. Click on "Next" to proceed. You will then see a license agreement screen. Read the terms and conditions and click on "I Agree" if you accept them. You will then see an installation path screen. You can change the destination folder if you want, or leave it as default. Click on "Next" to continue. You will then see an installation confirmation screen. Click on "Install" to start the installation process. Wait for a few minutes until the installation is complete. You may see a progress bar and some messages on the screen. When the installation is finished, you will see a completion screen. Click on "Finish" to exit the setup program.
Step 4: Connect Your Device
Now that you have installed the driver, you can connect your SMCWUSBS-N3 wireless USB adapter to your computer. Plug it into an available USB port and wait for a few seconds until Windows recognizes it. You should see a notification in the system tray that says "Installing device driver software". After a while, you should see another notification that says "Your device is ready to use". You can now use your wireless USB adapter to connect to a Wi-Fi network.
Conclusion
In this article, we have shown you how to download and install the SMCWUSBS-N3 driver for Windows 7 62-bit. We hope that this guide was helpful and that you were able to successfully install the driver and use your device. If you have any questions or problems, please refer to the user manual or contact SMC Networks customer support.